LUFTOMET Wall insect screen with Magnets anthracite - 125 mm

LUFTOMET®  Wall products are end elements for air distribution systems. They are used on exterior building facades for air intake or exhaust. These outdoor facade covers stand out with their stylish design and high-quality craftsmanship, easy installation and maintenance, and very low pressure losses. Our Air diffusers are: • designed for ducts with diameters of 125, 160, and 200 mm • equipped with a sealing ring on the spigot making them suitable for all types of ducts (EPE, EPS, EPP, SPIRO, etc.) • suitable for fresh air intake and exhaust of normally polluted air (without chemical substances, etc.) • made of metal, carefully powder-coated (white RAL 9010, black RAL 9005 matte, anthracite RAL 7016), or made of stainless steel (1.4301) • equipped with a drip edge that diverts water drops away from the building facade and fitted with an insect screen Package includes: Outdoor facade cover (without mounting accessories). Packed in a stretch film.

LUFTOMET®  Wall products are end elements for air distribution systems. They are used on exterior building facades for air intake or exhaust. These outdoor facade covers stand out with their stylish design and high-quality craftsmanship, easy installation and maintenance, and very low pressure losses. Our Air diffusers are: • designed for ducts with diameters of 125, 160, and 200 mm • equipped with a sealing ring on the spigot making them suitable for all types of ducts (EPE, EPS, EPP, SPIRO, etc.) • suitable for fresh air intake and exhaust of normally polluted air (without chemical substances, etc.) • made of metal, carefully powder-coated (white RAL 9010, black RAL 9005 matte, anthracite RAL 7016), or made of stainless steel (1.4301) • equipped with a drip edge that diverts water drops away from the building facade and fitted with an insect screen Package includes: Outdoor facade cover (without mounting accessories). Packed in a stretch film.

LUFTOMET®  Wall products are end elements for air distribution systems. They are used on exterior building facades for air intake or exhaust. These outdoor facade covers stand out with their stylish design and high-quality craftsmanship, easy installation and maintenance, and very low pressure losses. Our Air diffusers are: • designed for ducts with diameters of 125, 160, and 200 mm • equipped with a sealing ring on the spigot making them suitable for all types of ducts (EPE, EPS, EPP, SPIRO, etc.) • suitable for fresh air intake and exhaust of normally polluted air (without chemical substances, etc.) • made of metal, carefully powder-coated (white RAL 9010, black RAL 9005 matte, anthracite RAL 7016), or made of stainless steel (1.4301) • equipped with a drip edge that diverts water drops away from the building facade and fitted with an insect screen Package includes: Outdoor facade cover (without mounting accessories). Packed in a stretch film.

LUFTOMET®  Wall products are end elements for air distribution systems. They are used on exterior building facades for air intake or exhaust. These outdoor facade covers stand out with their stylish design and high-quality craftsmanship, easy installation and maintenance, and very low pressure losses. Our Air diffusers are: • designed for ducts with diameters of 125, 160, and 200 mm • equipped with a sealing ring on the spigot making them suitable for all types of ducts (EPE, EPS, EPP, SPIRO, etc.) • suitable for fresh air intake and exhaust of normally polluted air (without chemical substances, etc.) • made of metal, carefully powder-coated (white RAL 9010, black RAL 9005 matte, anthracite RAL 7016), or made of stainless steel (1.4301) • equipped with a drip edge that diverts water drops away from the building facade and fitted with an insect screen Package includes: Outdoor facade cover (without mounting accessories). Packed in a stretch film.

LUFTOMET® insect screen is a practical accessory for outdoor facade cover that protects the air handling system from insects and small dirt. It is suitable for use on exterior building facades for fresh air intake and air exhaust. Thanks to its sophisticated design, it helps to keep the air handling ducts clean without significantly restricting the air flow. The screen allows for easy inspection, maintenance and replacement and is a practical solution for long-term protection of air handling systems.

LUFTOMET® insect screen is a practical accessory for outdoor facade cover that protects the air handling system from insects and small dirt. It is suitable for use on exterior building facades for fresh air intake and air exhaust. Thanks to its sophisticated design, it helps to keep the air handling ducts clean without significantly restricting the air flow. The screen allows for easy inspection, maintenance and replacement and is a practical solution for long-term protection of air handling systems.

LUFTOMET® Jet is a range of elegant wall nozzles, specially designed for ventilation with heat recovery in houses and apartments. LUFTOMET® Jet provides supply and, where appropriate, exhaust of air with low pressure drops, excellent throw length and sound power levels. Installation and servicing are easy thanks to a unique attachment system using four neodymium magnets.

LUFTOMET® insect screen is a practical accessory for outdoor facade cover that protects the air handling system from insects and small dirt. It is suitable for use on exterior building facades for fresh air intake and air exhaust. Thanks to its sophisticated design, it helps to keep the air handling ducts clean without significantly restricting the air flow. The screen allows for easy inspection, maintenance and replacement and is a practical solution for long-term protection of air handling systems.

LUFTOMET® Jet is a range of elegant wall nozzles, specially designed for ventilation with heat recovery in houses and apartments. LUFTOMET® Jet provides supply and, where appropriate, exhaust of air with low pressure drops, excellent throw length and sound power levels. Installation and servicing are easy thanks to a unique attachment system using four neodymium magnets.

Description These controllers are used to suppress noise and regulate airflow in ventilation systems with heat recovery. They are installed in ceiling boxes or in pipes just before the end element on the supply and exhaust pipes.  The PF regulator is made of special plastic acoustic foam with very high damping properties. Adjusting the airflow is simple and quick - just turn the bottom ring. Use The silencer is designed for use in circular air distribution systems and is mounted directly in front of the valve or nozzle. It can be used for supply and exhaust pipes. It is used for smooth regulation of airflow and noise suppression of ventilation systems. This is especially useful in situations where the airflow is too high at a given location and control of the terminal element is not possible or generates a lot of noise. Construction The shock absorber consists of two foam discs: - damping element made of soft PUR acoustic polyurethane foam with excellent damping properties, coated on one side with a protective film - adjustment disc made of rigid polyethylene PE foam. Dimensions for a diameter of 125 mm: