Site under construction
LUFTooL Adapter 90 mm HT (40, 50)
We offer a solution to effectively ventilate the toilet without heat loss. Modern toilets today are often equipped with odor extraction units. In order for the system to be 100% energy-efficient, it is advisable to connect it to a controlled ventilation system with heat recovery. The components are provided by the LUFTooL Smell Well range.
The HT transition enables connection to the HT sewage distribution system, with which toilet manufacturers end the ventilation system from the bowl.
The smell from the toilet continues through the control flap and the branch to the ceiling outlet to the recovery unit.
Construction:
1) Thread the sealing ring onto the plastic flexible pipe, cut between the ribs (second groove)
2) Apply lubricant (not included) to the sealing ring
3) Insert the flexible plastic pipe into the adapter so that the locking holes are above the grooves
4) Insert the blue locking ring through the adapter between the ribs of the plastic pipe
On the other side, insert the adapter into the neck of the HT pipe. The adapter is perfectly sealed by an internal rubber sleeve in the neck of the HT pipe and does not need to be sealed in any way.
Package contents:
1) Adapter (PETG)
2) Sealing ring (EPDM)
3) Locking ring (PETG)
Packed in a bag.
You might be interested
LUFToL Adapter 90 mm - nozzle - transition of flexible air duct to 100 and 125 mm fittings
The adapters are suitable for modern ventilation distribution systems with heat recovery with a plastic flexible pipe of 75 or 90 mm (depending on the selected variant).
Price on request
in stock
LUFTooL Trap - SPIRO (Metal Ducting Condensation Trap)
Purpose: Condensation Traps for control of condensation/moisture in ducts of ventilation systems. If the extracted air is significantly cooled and you have a vertical pipe the moisture will condense back to water and become trapped in your ducting, potentially causing damage to the fan and property. Systems using Roof Vents or Ducting rising vertically carrying extract air to outside benefit with the use of a condensate trap, this is to prevent any moisture forming inside the ductwork, dropping back down and into the fan unit. Technical details: Compatible with d16 condensate drain hose. Suitable for vertical ducts. Height: 8-12 cm (according to chosen diameter) Compatible with SPIRO ducting Made in the Czech Republic, by Luftuj sro Constructed of: PETG Flexible and strong High impact resistance and durability Healthy material Slight shrinkage on cooling 100% recyclable Package contains: 1 ) condensation piece Packed in a plastic bag.
Price on request
LUFToL Adapter 90 mm flexi pipe - nipple for duct 100 or 125 mm
The adapters are suitable for modern ventilation distribution systems with heat recovery with a plastic flexible pipe of 75 or 90 mm (depending on the selected variant).
Price on request
in stock
LUFTooL Branch 75 mm branch 45 degrees - for plastic flexible air ducts
https://www.luftuj.cz/p/odbocka-pro-flexibilni-potrubi-75-mm/
Price on request
upon inquiry
LUFToL Adapter 75 mm - nipple - transition of air-technical flexible pipe to pipe 100 and 125 mm
The adapters are suitable for modern ventilation distribution systems with heat recovery with a plastic flexible pipe of 75 or 90 mm (depending on the selected variant).
Price on request
in stock
LUFTooL Branch 90 mm branch 45 degrees - for plastic flexible air ducts
Price on request
upon inquiry
