LUFTooL Branch 90 mm branch 45 degrees - for plastic flexible air ducts

Purpose: Condensation Traps for control of condensation/moisture in ducts of ventilation systems. If the extracted air is significantly cooled and you have a vertical pipe the moisture will condense back to water and become trapped in your ducting, potentially causing damage to the fan and property. Systems using Roof Vents or Ducting rising vertically carrying extract air to outside benefit with the use of a condensate trap, this is to prevent any moisture forming inside the ductwork, dropping back down and into the fan unit. Technical details: Compatible with d16 condensate drain hose. Suitable for vertical ducts. Height: 8-12 cm (according to chosen diameter) Compatible with SPIRO ducting Made in the Czech Republic, by Luftuj sro Constructed of: PETG Flexible and strong High impact resistance and durability Healthy material Slight shrinkage on cooling 100% recyclable Package contains: 1 ) condensation piece Packed in a plastic bag.

The HT transition enables connection to the HT sewage distribution system, with which toilet manufacturers end the ventilation system from the bowl.

The HT transition enables connection to the HT sewage distribution system, with which toilet manufacturers end the ventilation system from the bowl.

The adapters are suitable for modern ventilation distribution systems with heat recovery with a plastic flexible pipe of 75 or 90 mm (depending on the selected variant).

The adapters are suitable for modern ventilation distribution systems with heat recovery with a plastic flexible pipe of 75 or 90 mm (depending on the selected variant).

https://www.luftuj.cz/p/odbocka-pro-flexibilni-potrubi-75-mm/