Follow us for more news:
Follow us:
LUFTooL Trap - Condensing Piece for EPE Pipes
LUFTooL Trap products are designed to collect condensed water on the inside of the pipe in the ventilation systems. They are usually installed on pipes that blow air from the interior through the unheated part of the house. The condensation piece drains condensate from the duct walls outside the duct.
 |
 |
 |
 |
 |
 |
 |
Our Condensing Pieces are:
• very tight - designed to save space compared to other condensate collection solutions
• equipped with a gutter elbow that is compatible with conventional condensate drainage hoses
• made of PETG material, thus minimising the formation of thermal bridges
• designed to be installed in vertical and horizontal pipes (horizontal pipes must always be in a gradient towards the drain)
• efficient, depending on the flow rate and type of pipe material, they are able to collect up to 91% of condensed moisture
• manufactured in three variants (for EPE, EPS and SPIRO pipes)
• which is a flexible and strong material
• has high impact resistance and durability
• is made from health-safe materials
• has low shrinkage on cooling
• is 100% recyclable
Cut the pipe in the place where you want to place the condensation piece. Vertical piping at the heated boundary of the thermal envelope is ideal.
Place a condensation piece on the bottom of the pipe and cut a hole for the plastic elbow as tightly as possible with a snap-off knife. Insert the condensation piece and fit the top parts of the pipe.
Seal the joint airtight with aluminum tape and thermally secure with at least two layers of thermal tape.
Connect the condensate drain hose to the elbow and connect it to the sewer through a flooded siphon (beware of freezing).
Condensation piece, manual. Packed in a box or foil.
Manual:
This product is made Luftuj LtD in the Czech Republic and exported to several European countries.
Accessories
You might be interested
Extension cable for LUFTooL damper modules with automatic control. It is used to extend the wires between the actuator and the control unit. It is equipped with an M-male connector on one side and an F-female connector on the other. Length 20, 40, 60 cm.
Price on request
in stock
LUFTooL Spigot for Ducting (100 mm, female)
The SPIRO pipe connector with a diameter of 100 mm is a universal modular element from the LUFTooL Distribute series. It consists of components that can be quickly and tightly screwed together into various units. The LUFTooL Distribute system is: • an innovative system for distributing air flow into individual zones/rooms • modular (its components can be combined) • designed for flexible plastic pipes with a diameter of 75 and 90 mm and traditional SPIRO pipes of 100 mm • designed for ventilation in family houses and small businesses with air flows through individual branches up to 100 m3/h • a very tight system achieves class D tightness according to ČSN EN 15727 • suitable for the supply and exhaust of commonly polluted air (without chemicals, etc.) • fully cleanable, brushes can be pulled through the damper without dismantling the damper module • made of ABS and PETG The package contains: Plastic molding of the nozzle body (PETG), T-shaped sealing ring. Packed in a plastic bag. Dimensions: The nozzle can be screwed on one side, e.g. to: LUFTooL connectors (LF-CO-125) - which are inserted into the distribution box LUFTOMET® Flat boxes LUFTooL damper module with automatic or manual control Installation examples Mounting via connector or damper module to the distribution box Mounting Screw on the appropriate module. Then slide the pipe over the seal and secure with a self-tapping screw.
Price on request
not in stock
