Follow us for more news:
Follow us:
LUFTooL Trap - Condensing Piece for EPE Pipes
LUFTooL Trap products are designed to collect condensed water on the inside of the pipe in the ventilation systems. They are usually installed on pipes that blow air from the interior through the unheated part of the house. The condensation piece drains condensate from the duct walls outside the duct.
 |
 |
 |
 |
 |
 |
 |
Our Condensing Pieces are:
• very tight - designed to save space compared to other condensate collection solutions
• equipped with a gutter elbow that is compatible with conventional condensate drainage hoses
• made of PETG material, thus minimising the formation of thermal bridges
• designed to be installed in vertical and horizontal pipes (horizontal pipes must always be in a gradient towards the drain)
• efficient, depending on the flow rate and type of pipe material, they are able to collect up to 91% of condensed moisture
• manufactured in three variants (for EPE, EPS and SPIRO pipes)
• which is a flexible and strong material
• has high impact resistance and durability
• is made from health-safe materials
• has low shrinkage on cooling
• is 100% recyclable
Cut the pipe in the place where you want to place the condensation piece. Vertical piping at the heated boundary of the thermal envelope is ideal.
Place a condensation piece on the bottom of the pipe and cut a hole for the plastic elbow as tightly as possible with a snap-off knife. Insert the condensation piece and fit the top parts of the pipe.
Seal the joint airtight with aluminum tape and thermally secure with at least two layers of thermal tape.
Connect the condensate drain hose to the elbow and connect it to the sewer through a flooded siphon (beware of freezing).
Condensation piece, manual. Packed in a box or foil.
Manual:
This product is made Luftuj LtD in the Czech Republic and exported to several European countries.
Accessories
You might be interested
The connector is part of the LUFTooL Distribute system, which is innovative and modular. The entire system is designed for easy air regulation, thanks to which it is possible to freely distribute the air flow in individual zones or rooms in family houses and smaller businesses. However, individual elements can also be used for other elements such as ceiling and wall boxes. For example, the connector can be installed in any box with an appropriate opening. The LUFTooL Distribute system is: • an innovative system for distributing air flow into individual zones/rooms • modular (its components can be combined) • designed for flexible plastic pipes with a diameter of 75 and 90 mm and traditional SPIRO pipes of 100 mm • designed for ventilation in family houses and small businesses with air flows through individual branches up to 100 m3/h • a very tight system achieves class D tightness according to ČSN EN 15727 • suitable for the supply and exhaust of commonly polluted air (without chemicals, etc.) • fully cleanable, pulling brushes through the damper can be done without dismantling the damper module • made of ABS and PETG Package includes: Connector (PETG), two sealing rings. Packed in a plastic bag. Assembly: E.g. to: LUFTooL damper module with automatic or manual control LUFTooL pipe sockets (75, 90 and 100 mm) Installation examples Installation via connector or damper module to distribution box
Price on request
we will complete
8 ks do 14.12.2025
