LUFTooL Spigot for Ducting (100 mm, female)
The SPIRO pipe connector with a diameter of 100 mm is a universal modular element from the LUFTooL Distribute series. It consists of components that can be quickly and tightly screwed together into various units.
The LUFTooL Distribute system is:
• an innovative system for distributing air flow into individual zones/rooms
• modular (its components can be combined)
• designed for flexible plastic pipes with a diameter of 75 and 90 mm and traditional SPIRO pipes of 100 mm
• designed for ventilation in family houses and small businesses with air flows through individual branches up to 100 m3/h
• a very tight system achieves class D tightness according to ČSN EN 15727
• suitable for the supply and exhaust of commonly polluted air (without chemicals, etc.)
• fully cleanable, brushes can be pulled through the damper without dismantling the damper module
• made of ABS and PETG
The package contains:
Plastic molding of the nozzle body (PETG), T-shaped sealing ring.
Packed in a plastic bag.
Dimensions:

The nozzle can be screwed on one side, e.g. to:
LUFTooL connectors (LF-CO-125) - which are inserted into the distribution box
LUFTOMET® Flat boxes
LUFTooL damper module with automatic or manual control
Installation examples
Mounting via connector or damper module to the distribution box
Mounting
Screw on the appropriate module. Then slide the pipe over the seal and secure with a self-tapping screw.
Technical Sheet:
You might be interested
LUFTooL DB Single-row Distribute Box LT-DB-SR-160-3417 (custom)
The LUFTooL Distribute Box is a modular distribution unit for heat-recovery ventilation systems, custom-designed for each specific project. Featuring direct airflow paths, low pressure drops, easy maintenance, and built-in readiness for the LUFTaTOR multi-zone control system, it ensures quiet, efficient, and flexible operation of the ventilation system.
Price on request
we will make
LUFTooL Y-cable Extension Wire 300 mm
Extension cable for LUFTooL automatically controlled damper modules. Used to extend the wiring between the servo actuator and the control unit. Equipped with a male (M) connector on one end and a female (F) connector on the other. Available in lengths of 20, 40, and 60 cm.
Price on request
LUFTooL Trap Condensation Piece SPIRO
LUFTooL Trap products are designed to collect condensed water on the inside of the pipe in the ventilation systems. They are usually installed on pipes that blow air from the interior through the unheated part of the house. The condensation piece drains condensate from the duct walls outside the duct. Our Condensing Pieces are: • very tight - designed to save space compared to other condensate collection solutions • equipped with a gutter elbow that is compatible with conventional condensate drainage hoses • made of PETG material, thus minimising the formation of thermal bridges • designed to be installed in vertical and horizontal pipes (horizontal pipes must always be in a gradient towards the drain) • efficient, depending on the flow rate and type of pipe material, they are able to collect up to 91% of condensed moisture • manufactured in three variants (for EPE, EPS and SPIRO pipes) Made of PETG material: • which is a flexible and strong material • has high impact resistance and durability • is made from health-safe materials • has low shrinkage on cooling • is 100% recyclable Package includes: Condensation piece, 2 sealing rings for the SPIRO version, manual. Packed in a box or foil
Price on request
LUFTooL DB single-row distribute box LT-DB-SR-160-2630 (custom)
The LUFTooL Distribute Box is a modular distribution unit for heat-recovery ventilation systems, custom-designed for each specific project. Featuring direct airflow paths, low pressure drops, easy maintenance, and built-in readiness for the LUFTaTOR multi-zone control system, it ensures quiet, efficient, and flexible operation of the ventilation system.
Price on request
we will make
do 21.11.2026
The LUFTooL Screw Plug is a screw-in cap designed for the quick, airtight sealing of unused ports on LUFTooL Distribute distribution boxes. It allows for both temporary and permanent sealing without the need for sealants; it is easy to install and remove, and its threaded connection ensures a reliable seal. It is made from durable PETG material.
Price on request
in stock


































