LUFTOMET Flat grille Klasik black - metal

The edition of products called LUFTOMET® Flat refers to products for finishing air conditioning in interiors. Design grids, boxes and other elements are made so that their installation takes up as little space as possible, and is easy and fast.

It is therefore perfectly applicable in the reconstruction of family houses and apartments, as well as in wooden buildings.
Grilles are available in several designs, colors and materials that elegantly complement any interior. LUFTOMET® Flat grids can be installed on the wall or in the ceiling.

To install the LUFTOMET® Flat grid, an Inset is always required, which is inserted into special boxes from the same edition (LF-PB-*). The inset, the frame, is then connected via plasterboard to the box using four screws. The design grid itself is attached to the Inset (frame) either mechanically (metal grids) or using magnets integrated into the Inset (plastic grids). In case of installation through the wall, a special extension piece can be used between the box and the inset.

Construction:

1) Insert the body of the Inset into the Flat box, the edge of the inset rests on the plasterboard over the entire surface. Using the screws behind the recessed head, connect the inset to the box through the prepared holes.

2) Fitting the grid

The plastic grids connect to the Insets using magnetism. The grilles are equipped with steel counters from the non-view side. The insets have built-in magnets. Hexagon grids allow flow regulation by inserting polyhedrons.

The metal grids are mechanically attached to the Inset. The grids have metal flaps on the body that fit into the body of the Inset. Klasik grilles are adjustable by tilting the slats.

Installation in plasterboard:

Hole in plasterboard A=108 mm B= 196 mm

Wall installation:

(extension piece not included)

Delivery includes:

1) Grid - outer dimension 232x132 mm

2) Inset - PETG plastic

Packed in foil.